MORETTO Company highlighted the new EUREKA drying system at the China International Plastics and Rubber Exhibition. MORETTO is one of the world's leading manufacturers of auxiliary equipment in Massanzago, Italy. At the China International Plastics and Rubber Exhibition, Paolo Gasparotto, MORETTO's sales manager, interviewed the reporter and introduced the latest technologies and products. The new EUREKA drying system was highlighted. The fully automatic, high-capacity modular MORETTO drying system combines the new X MAX dryer with the FLOWMATIK controller and the new OTX hopper to achieve a processing capacity of 8000 kg/h, combined with a modular generator of 20,000 m3/h , Can form 10 modular drying devices and multiple drying hoppers with flexible production capacity, and no need for compressed air or cooling water, so it can quickly, uniformly and gently dry high hygroscopic polymers such as PET, with greatly reduced energy The advantages of consumption. The difference between this multi-tower system and the traditional system is that it can maintain a stable and uniform dew point throughout the entire process, resulting in extremely high efficiency and a very flexible working process (eg, a mixture of preformed specifications and weights). . High efficiency can be maintained even at low throughput. The company did not sign a purchase contract when installing the EUREKA system, but only charged monthly for the difference in energy consumption between the old equipment and the newly installed equipment. Two years later the system was paid for and the system was owned by the user. This is only achieved through energy saving. If the user is not satisfied, the system can be returned to MORETTO. The user does not need to bear any additional costs. Referring to low-carbon and environmental protection, Paolo Gasparotto explained that the centrally located heat exchanger ensures that the renewable energy can be fully recycled and that each watt of energy can be used for the drying of the polymer. Another processing advantage is that one dryer can be taken off-line and a completely new regenerated dryer can be replaced, thereby not only greatly reducing the energy consumption but also achieving a more uniform heating and a lower airflow rate. Effective regeneration, thereby providing a flexible high-capacity, high-efficiency system. Not only increase the efficiency of the drying system but also achieved the effect of low-carbon environmental protection. The new EUREKA drying system has great development prospects based on its current advantages. Hydraulic Busbar Cutting Punching Bending Machine
The multifunction busbar processing maching is the patented product developed by our company.Comparing with the traditional Busbar Processing Machine, this product has the following advantages and features:
The punching and shearing units adopt round integral structure, with novel and unique design rendering reasonable force bearing, and thus effectively guarantees the long-term use without deformation;
The bending unit uses integral structure and CNC angle control mode, allowing easy operation and high accuracy;
This machine adopts the design approach of double-layer work bench, truly realizing the simultaneous working of three stations without mutual interference;
The machine is provided with an automatic oil charge and discharge system, easy to operate, with the hydraulic oil charged into the oil tank via a filter so as to protect the entire hydraulic system from contamination;
This machine is provided with stainless steel oil tank to protect the hydraulic oil from corrosive deterioration, and extend the service life of hydraulic oil and the seals; PLC control that is stable and reliable.
Swappable dies offering extreme convenience;
PLC control that is stable and reliable.
Hydraulic Punching Machine,Hydraulic Busbar Cutting Punching Bending Machine,Cnc Busbar Punch Machine,Cnc Busbar Shear Machine JINAN EURO-ASIA MACHINERY CO., LTD , https://www.eaelectricmachine.com