v SS304 housing , up to 35% of UV efficiency
UV-C bulb, a low-voltage discharge lamp, with a tubular glass housing fired short-wave ultraviolet radiation, which wavelength is 253.7 nm.
Efficiency sterilization: Disinfect 99.9% harmful bacteria, viruses in 1-2 seconds
Compared to chemical disinfection, UV water disinfection can never overdose, has no effect on taste and odor, and no carcinogenic disinfection by-products are produced with UV water disinfection.
UV water disinfection is considered effective against cryptosporidium and giardia, pathogens which are almost completely resistant to chlorine.
Application in various fields: industry water system, housing drinking water, food processing, pharmaceutical industry and so on
Home Uv Water Purifier,Drinking Water Uv Sterilizer,Water Disinfection Systems,Ballast Water Uv Sterilizer Hebei Guanyu Environmental Protection Equipment Corp.,Ltd. , http://www.uv-watertreatment.com
PVC pipe extrusion line is mainly used for producting plastic pipe for agriculture water supply & sewage, for building industries water supply & sewage, for cable and wire laying.
The line consist of twin screw extruder, vacuum tank, cooling tank, haul-off unit, cutter and storage table.
Single extruder and haul-off unit adopt international brand AC inverter speed control, Vacuum pump and haul-off motor use premium bgrand.
The extrusion line can produce pressure water pipes, drainage pipes, industrial pipes and cables duct. The screw structure for the corresponding designed to meet the processing of high filling material(Caco3) pipe requiement, according to the use of pipe, change molds and the corresponding auxiliary equipment, can be processed produce UPVC pipe,CPVC pipe, PVC-M pipe, PVC-O pipe, foam core layer pipe, foam inside the spiral hollow wall spiral pipe.
Haul-off can be equipped with 2/4/6/8/10/12 belt according to the pipe sizes. Cutter can be swarfless, saw blade, or planetary cutting type.
The line featured by stable performance and high efficiency. This line can also produce PE PP inner sprial pipe, hollow pipe, and foaming pipe bychaning the configruation.
The line is fully Automatic control, easy operation, stable performance, reaching international leading level.
Optimized spiral die ensure the melt distribution uniform to make the pipe wall uniform and guarantee the pipe pressure. Equipped copper Vacuum calibration sleeve with water lubrication ring, twin-chamber vacuum tank with spraying cooling and semicircular Nylon support, to ensure fast calibration, increase the production capacity and lower the operation. These designs are especially good for big diameter pipe production and high speed production.
All of vacuum tank and water cooling tank is made from stainless steel, dual water supply pipe line with filtration system, water level and temperature control system and optimized positioning of the bayonet-type spray nozzles.
The twin or multi caterpillar haul-off unit is equipped with high quality rubber block or rubber belt(for high speed production) accuracy driving and control system ensure the speed stable and running reliable.
Accurate non-scrap cutting machine (less than 160mm) and planetary cutting machine ensure the cutting section smooth and uniform.
Extruder
SJZ-51/105
SJZ-55/110
SJZ-65/132
Pipe diameter
GF-63
16-63
16-63
50-160
50-250
Mould
single pipe
double pipes
double pipes
single pipe
single pipe
Downstream equipment
GF-63
GF-63*2
GF-63*2
GF-160
GF-250
Total power
60
70
91
85
86.5
For any inquiry, please contact us directly.
Â
Mobile: 0086-13917356326
Â
PVC UPVC Drain Plastic Pipe/Channel Extrusion Making Machine
Model NO.: GMT-pipe
Condition: New
Model: PVC-63-800
Diameter: 16-800mm
Output: 120-900
Speed: 15
Trademark: GMT
Transport Package: as Per Requirement
Specification: CE SGS
Origin: China
HS Code: 84778000
Product Information