Do not let the tire hot temper before the trip to check more

The weather is getting hotter. Maybe your car tires start to feel a little angry on the road. Tire explosions, fatigue driving, and speeding are the top three killers of highways. According to statistics, about 1/3 of traffic accidents on the highway are caused by tire failures, and the most important one is puncture. For your safety, you have to remind owners to understand the tire maintenance knowledge.

The weather becomes hot and it is easy to puncture the tires, especially in the hot summer days, when the hot weather is easy to deform the tire, the tensile strength is reduced. As the tire itself, the air pressure is not standard, the tire is aging, the performance is weakened, or the tire is rolled into a hard metal or other hard object during driving, which can cause the car to burst suddenly. The tire heats up after a long period of high-speed driving, so it is normal for the temperature to rise and the air pressure inside the inner tube to increase slightly. The tire consumes energy during the rolling process, and some of it is converted into heat by the tire. If the heat is not dissipated in time, the temperature of the tire will increase. Excessive warming (over 95°C) will cause the tire to delaminate until the tire bursts.

● Traffic police remind

Check the tires before traveling
The traffic police department prompts that the greatest protection for safe driving depends on the tires. Each time you go out, you need to check the tires including the spare tires. When checking, you should also observe whether there are cracks or scratches on the tire surface. It is best to put gloves on the inside of the tires to check if they are There are suspicious traces. As long as the slightest suspicious point is found, you should immediately ask the car dealer to do a detailed inspection. Tired tires do not want to throw. If it is found that the condition of the tire surface is not normal, it should be thought that there may be problems with the adjustment of the toe of the wheel and it is necessary to repair it.

Reporter Weapon

Rugged road slow down

Although hot weather tends to make the tires tantrum, but as long as the proper attention, you can still "fire" the tire.

First of all, it is necessary to go to the beauty shop to wash the car, and spending a small amount of money can not only help the beauty of the car, but also cool down the temperature, and it can also allow the other party to check the tire pressure. Whether you go to the car wash or you usually have to pay attention to check the tire pressure, at any time to observe changes in the appearance of the tire, found that abnormal treatment in time.

Secondly, to achieve smooth driving, starting, turning and braking must be stable, keep the car running in a straight line, minimize the brakes, and in the case of ensuring safety, “slip brake”, reduce the tires and the ground caused by too fast starting Abnormal wear.

Third, in the event of uneven roads or impact from hard objects, it is easy to cause birth defects or puncture accidents. Try to choose a relatively flat road, should be slow down in advance when bumpy road, avoid high-speed impact tires. Diligently check the tire pressure and dig diligently into the small stones embedded in the tread pattern. In addition, you should try to park your car in a cool place and avoid exposure to sunlight.

● 4S shop statement

Tire problem is not covered by warranty

There are many complaints about tires on the market. For example, a few days after the new car was purchased, the tires appeared to have “bulls”. The reporter consulted Foshan Xiongfeng Nissan Store on the warranty of the tires. Sun Weixing, the manager of the store's marketing department, said: “Whether the vehicle is under warranty or not, we don’t have any warranty on the tires.” Zhou Hongling, manager of Jitai Nissan Market, told reporters: “Almost Every car manufacturer removes the tires from the scope of warranty. Because the tires have problems, it is difficult to judge whether they are quality problems or whether the owners have used them improperly."

● insurance company statement

Tire insurance is hard to judge

Tire problems are difficult to claim and are common in the insurance industry. The reporter learned from the claims department of an insurance company in Foshan that the insurance company will add a clause in the exemption clause, that is, the tire is damaged separately, and the insurance company is not responsible for compensation. In addition, for the insurance of tires, it is difficult for insurance companies to determine whether the tires were damaged by accidents, human-caused damages, or people who deliberately punctured tires for fraud.

3D Printing

SLA-Stereo Lithography Appearance technology, using photosensitive resin 3-D printing materials: milky white texture, good strength, but relatively small toughness, small and thin brittle fracture, but easy to grind, electroplating, painting and coloring. Photosensitive resin is composed of two parts, namely photoinitiator and resin (resin consists of prepolymer, diluent and a small amount of additives). The amount of photoinitiator and diluent has an important influence on the curing speed and quality of photosensitive resin. When the proportion of photoinitiator and diluent is appropriate, not only the curing speed is fast, but also the curing quality is good. Therefore, in order to select large brand manufacturers, mature and stable photosensitive resin 3D printing materials are very important. In terms of performance, there are also some imported photosensitive resin materials with high strength, transparency, high temperature resistance, moisture resistance and waterproof functions. In addition, three-dimensional printing materials of composite ceramics, such as alumina (AI2O3) m zirconia (ZRO2), hydroxyapatite (HAP), tricalcium phosphate (TCP) and so on, which are similar to high-resolution ceramic powder and photosensitive resin, can be selected.


SLS-Selective Laser Sintering technology, using 3D printing materials: PA Series Nylon 3D Printing Material: Abrasion Resistance, High Strength and Stiffness, Good Chemical Resistance, Excellent Long-term Invariant Behavior, High Selectivity and Detailed Analysis, Biocompatibility in accordance with EN ISO 10993-1 and USP, and in accordance with EU Plastics Directive approved for food contact. Typical applications of this material are the highest quality of fully functional plastic parts. But the surface is relatively rough. There are also PA3200GF nylon fiberglass materials for deep drawing dies or any other applications requiring specific stiffness, high thermal deformation temperature and low wear; typically used in aluminium-filled nylon materials for metallic appearance and thermal load parts. At present, desktop LS laser sintering PA12 nylon powder material is also an option.


SLM Selective Laser Melting technology,Under the irradiation of high density laser energy, metal powders can be completely melted. After cooling, they can be shaped and welded. It is through this process that SLM technology forms the 3d model layer by layer.SLM technology can print stainless steel, die steel, cobalt chromium alloy, titanium alloy, aluminum alloy, copper alloy, nickel base alloy powder, etc.It can print metal parts with complex structure to help shorten product development cycle and reduce R & D cost.

3D Printing


3D Printing,Electric Tool,Rapid Prototype,3D Printing Stereolithography

Ningbo Expert Mould Plastic Co., Ltd. , https://www.prototypesmaker.com