CNC Milling is a form of computer numerical controlled (CNC) machining. It is a process similar to that of cutting and drilling, and uses a rotational cylindrical cutting tool to remove material from metal components by the movement made within the machine itself.
CNC Milling is used to apply a machined surface finish on engineering-grade plastic or metal or for creating complex 3D shapes. HZ Technology use high Precision Cnc Machining centers with quick-change tooling. HZ Technology toolpaths the digital part design to our CNC machines. During the machining process, a solid block of material is clamped into a CNC mill and cut into a finished part. The range of material choices allows parts to be made with the desired material properties, and good tolerances yield parts suitable for form, fit and function testing.
CNC Milling CNC Milling,Custom Cnc Machining,Precision Cnc Machining,CNC Milled Parts Hongzhun technology Co., Limited , http://www.custommoldcomponents.com
In recent years, with the advancement of computer technology, robots have become smarter. In addition to the well-known HONDA Asimo humanoid robots, many manufacturers have developed robots for global environmental research, such as the successful development of Mitsui Shipbuilding. Sneak into the 300m deep seabed for detection, so that the underwater world is unmistakable.
Past small water currents affect ocean by the robot inside, and unable to move forward towards the destination, but by Mitsui Engineering & Shipbuilding developed "Mitsui RTV. N-Hyper300EXY", not only configure high-power thrusters will also be high-performance digital high-definition camera device Ultrasonic sonar, automatic stabilization system, etc. are listed as standard equipment, so it can sneak into the seabed of 300m depth in three minutes, shortening the working time. In addition, "Mitsui RTV. N-Hyper300EXY" For oceanographers, but observe fish and coral reef ecosystems best helper, and these oceanographer just following instructions can be remotely on board.
Depth: 300m
Size: 1190 × 590 × 640mm
Weight: 56kg
Speed: 3.6 knots
The main function:
Ultrasonic sonar, which can detect distant objects
Sonar tracking system
Touch operation screen
Automatic direction retention
Automatic direction stabilization
Automatic depth hold function
Automatic flip angle level hold function
Automatic dive angle retention function
1/3 å‹ 2 million pixel CMOS color camera in front, 10x magnification
Digital camera
Rear 1/3 å‹ 380,000 pixels CCD color camera