Matters needing attention when using a refrigerated truck

  1. The refrigeration system of a refrigerated truck is used to maintain the temperature of the goods in the cargo compartment instead of cooling the hot goods.

2. When refrigerated trucks load cargo, their stacking height should not exceed the limited load line, and there should be gaps between the cargoes to facilitate the circulation of cold air.

3. The operation and maintenance of the refrigeration unit shall be performed strictly in accordance with the instructions of the refrigeration unit.

4, for the relatively large refrigerator car, the vehicle center of gravity has been increased, it should pay attention to stability when driving, turning speed should be slowed down.

5, before loading, the goods and the car body must be precooled to the appropriate transport temperature, and then loaded. Close the refrigeration unit when loading or unloading. Minimize the number of open doors during transportation to reduce cold loss.

6, in order to prevent cross-infection, odor, each vehicle should be washed after use, eliminate odor, and disinfection to ensure the quality of the product transport. It should be noted that when cleaning, it is best to stop on the slope so that the sewage flows out.

7, should always keep the vehicle clean, no defects, every time before the car to check the chassis and chassis connection. Guarantee the safety of transportation.

8, refrigerated trucks should be stored in the rain, sun, moisture-proof fire facilities with the warehouse, and regular maintenance.

9. When transporting vehicles, use self-drive or drag-and-drop methods to disembark and disembark the boat. When lifting, special spreaders should be used to avoid damage to the vehicle.

10. It is strictly forbidden to strike the car body with sharp objects to prevent damage to the car body skin. After accidentally breaking, the small hole can be repaired with silicone rubber (glass glue). Contact with the manufacturer for repair should be timely.

Http://

The most widely used series whose shape is rectangle especially suitable for lifting and transporting billet , steel ingot, bloom, etc., and round , profiled steel as well. Different magnetic circuits are designed for different steels

1. Our History:

LITE Crane Co., LTD has focused on top quality Crane Parts for over 14 years in China. We started as a small operation, but now have become one of the leading suppliers in the crane industry in China.

Today, LITE Crane Co., LTD has been one of the top producers of quality crane and crane parts, such as: Electric Hoist, single, double girder bridge, gantry, grab, casting, explosion-proof crane series and accessories.

 

2. Our Factory:

LITE Crane Co., LTD is located in Xinxiang, Henan Province China. The company covers an area of 680 thousand square meters and owns more than 2700 employees. The annual sales of LITE Crane Co., LTD is 1.6 billion USD, there are more than 600 sales agencies at home and abroad and more than 180 middle& senior engineering and technical personnel who are in charge of design and development of all products and also own the development center of their new technology and products. 

                

3.Our Product:

Our Products includes the following:

 

1, Crane accessories

2, Electric hoist

3, Single - beam cranes

4, Double - beam cranes

5, Bridge Crane

6, Gantry Crane

7.Lifting equipment and accessories

We supply crane products all over the globe to a wide range of companies worldwide.

 

 

4.Product Application:

The products are widely used in the following industry, such as power plants, nuclear power, water conservancy, tunnels, bridges, petrochemical, metallurgy, construction, open-air warehouse, wharf, workshop ...

 

5.Our Certificate:

Our company is a member of China Crane Association and vice chairman company of China Heavy Machinery Association. It owns the production licenses of electric hoist, single & double-girder crane, the safety of the approval certificate of manufacturing, installation and maintenance, the safety approval certificate of the manufacturing of 320T bridge crane, portal crane and 280Tcasting crane.

The company has passed the quality system certification of GB/T19001 -2008/IS09001:2008, the environmental management system certification of GB/T24001-2004/ISO14001:2004 and the occupational health and safety management system certification GB/T28001-2001.

 

6.Production Equipment:

There are 1600 units of all kinds of processing equipment which can independently accomplish all the processes such as milling, digging, grinding, pulling, boring, rolling, drilling, punching, cutting, bending, welding, testing and heat treatment. 

 

7.Production Market:

Our products are sold to more than 30 provinces, municipalities and autonomous regions in China, and also exported to Australia, Vietnam, India, Thailand and some Southeast Asian countries. The annual sales of double-girder and portal cranes is more than 3600 units, more than 23000 units single-girder cranes, about 23000 units single-girder & double-girder electric hoist and accessories. The production and sales of the single-girder cranes has lead the nation for seven consecutive years and the per capita output and economic benefits are among the best in the same industry.

8.Our service:

Besides our existing molded products, LITECrane Co., LTD also can produce products according to the drawings or samples from our customers. We control the product quality critically for every step during the manufacturing from custom. 



Electromagnet

Small Electromagnet,Strong Electromagnet,Electropermanent Magnet,Powerful Electromagnet

Shandong Lite Electrical Co.,Ltd , http://www.chinacranegroup.com