High Quality and Small Valves for Gas Meter

Model NO.: SY-FW4-149
HS Code: 8481804090
Flow-rate Range 0~6m³/h
Working Pressure Range 0-15KPa
Pressure Loss ≤75Pa
Operating Voltage DC2.5~5.5V
Operating Current ≤80mA(3V)
Relative Humidity  ≤93%
Internal Leakage P=4KPa, ≤0.1L/h
Durability 5000 times(no fault)
Opening Valve Time 3S
Closing Valve Time 250mS~300mS
Temperature Range -20ºC~50ºC
Peak Current ≈210mA(3V)
Lifetime 10 Years
Gas Meter Application G1.6/G2.5/G4 Gas Meters
Structural Support Materials are POM, Valve Seal is NBR
Service Natural Gas/LPG

High Quality and Small Valves for Gas Meter
High Quality and Small Valves for Gas Meter
High Quality and Small Valves for Gas Meter
High Quality and Small Valves for Gas Meter
 

Gasketed plate heat exchangers, also known as gasketed plate-and-frame heat exchangers (GPHEs), provide efficient heat transfer in compact equipment with a small footprint - much smaller and more efficient than shell-and-tube heat exchangers.
Plate heat exchangers are designed to optimize heat transfer, because the corrugated plates provide by far the greatest surface area through which the heat can be drawn from one gas or liquid to the other.
The units also have a flexible design and are easy to service and maintain.
Gasketed plate heat exchangers benefits:
Precision heat transfer - closer approach temperature, true counter current flow, 80-90% less hold-up volume
Low overall cost - low capital investment, reduced installation costs, limited maintenance and operating costs
Maximum reliability - less fouling, stress, wear and corrosion
Environmentally responsible - minimum energy consumption for maximum process effect, reduced cleaning
Easy to expand capacity - simply add or remove plates on the existing frame
The product range is extremely wide and is used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration, engine cooling, dairy and food to heavier processes like chemical processing, oil production and power generation.
 
Gasketed plate heat exchangers may be the industry standard for general heating and cooling duties, but the technology inside a GPHE is far from standard. All plate heat exchangers are NOT created equal, and we've seen the consequences of choosing heat exchangers purely based on cost. We understand cost is important, but in most circumstances the costs to repair or replace units, as well as the inefficiencies of undersized units, far outweigh the upfront capital cost savings.  

Types of gasketed plate heat exchangers

Industrial - an extremely versatile range of heat exchangers for use in all types of industries
AlfaQ AHRI certified - similar to Industrial GPHEs, but are AHRI certified for HVAC applications
Industrial semi-welded - used in refrigeration when gaskets are not suitable for one of the media and when higher design pressures are needed
WideGap - used for applications involving fibrous liquids, highly viscous fluids, and fluids containing coarse particles
AlfaVap evaporators - tailor-made, rising film plate surface evaporator
AlfaCond condensers - a compact, plate surface vacuum condenser
Diabon - graphite Heat Exchanger used for tough corrosive media

Heat Exchanger Gasket

Heat Exchanger Gasket,Plate Heat Exchanger Gasket N35,Fkm Gasket Of Plate Heat Exchanger,A085 Heat Exchanger Gasket

Liaoning LotusNine International Trade co.,ltd , https://www.lj-heatexchangers.com