Abstract: In order to further improve the performance of heat pump system and extend its operating range, a quasi-two-stage compression heat pump system is introduced into injectors with simple structure, no moving parts and better adaptability to the two-phase flow. Compression - injection heat pump system. The effect of injectors with different injection coefficients and design structures on the performance of the combined heat pump system was measured under the different operating conditions of condensation temperature of 45 ℃ and evaporation temperature of -8 ℃ to -25 ℃. The results show that the injection coefficient and The design of a reasonable structure of the ejector, the composite heat pump system can be in a wide range of operating conditions with high efficiency, and the injection coefficient u = 0.1 heat pump system best performance. Key words: Thermotechnics; Heat pump; Experimental research; Ejector Abstract A quasi two-stage compression heat pump system coupled with ejector was designed to improve the performance and widen the range of the operation conditions of heat pumps. An experiment for the prototype of the heat pump system coupled with ejector was conducted at a condensation temperature The effects of the ejectors on the performances of the heat pump were analyzed. The results show that the heat pump coupled with the ejector with optimized construction has higher coefficient of performance in a wide range of operation conditions and can achieve excellent performances while ejecting coefficient is 0.1. 9 Ref. In Chinese. Keywords Pyrology; Heat pump; Experimental; Ejector
Ultra high strength heat treated anchor steel bar is a high performance steel that is inductively heat treated from hot rolled steel bars. It is widely used in anchoring, supporting, reinforcement and other projects in coal mine roadways, highway slopes, tunnels, dams, urban foundation pits etc. Pre-stressed concrete works, especially in coal mines.
This product not only has higher strength grade than ordinary hot rolled products, but also effectively reduces rock mass deformation, controls the surrounding rock damage range and has excellent impact resistance, which can resist sudden impact pressure and beneficial to ensure the safety of mining production.
This product has been approved by the Anbiao National Mine Product Safety Mark Center.
8.8 Bolt,Stud Anchor Bolt,High Tensile Bolt Grades,Wind Turbine Anchor Bolt SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.sdhighstrengthsteelbolts.com
Effects of Ejector on Performances of Quasi Two-stage Compression Heat Pump System Coupled with Ejector
PANG Zong-zhan ☆ MA Guo-yuan
☆ Beijing University of Technology, Beijing 100022, China