Computer Cross-Country Times Coming Enterprise Upgrades Cannot Delay

At present, the major computerized flat knitting machines in the world are Germany, Japan, Switzerland, China and other countries. Among them, China has gradually entered the research and production of computerized flat knitting machines since 2000, and has achieved rapid development through technology tracking. It is understood that global warming has further promoted the rapid development of China's knitting industry. In recent years, the demand for knitting equipment in the domestic knitting industry has been increasing. In many knitting machines, the computerized flat knitting machine has undoubtedly become the new darling in the knitting machinery market.

Market demand for computerized flat knitting machines In recent years, the Chinese knitting industry has developed rapidly. The upgrading of equipment is a matter of no delay. The market for computerized flat knitting machines in China is also quite broad. In order to adapt to the development of the times, knitted garment enterprises have continuously increased their overall equipment level and intensified R&D, design and market operations in order to occupy a place in the current highly competitive market. With the improvement of the requirements for garments, fashion, comfort and personalization of knitted garments, general flat knitting machines have been unable to adapt to the production requirements of high quality and complex patterns; at the same time, due to the continuous increase in the cost of labor, the production of ordinary flat knitting machines Inefficiency, variety change troubles, and slow response to the market, it is difficult to meet the needs of the development of knitted garment enterprises. Hand-operated flat knitting machines and semi-automatic flat knitting machines gradually withdrew from the historical stage to become the trend of industry development. Instead, they were replaced by more advanced computerized flat knitting machines. Domestic computerized flat knitting machines are favored by many small and medium-sized knitting companies for their high quality and low price. The computerized flat knitting machine industry in China is still in the basic development stage. The current annual output is about 40,000 sets. According to relevant market analysis, in the next three years, the annual demand for computerized flat knitting machines in the domestic market will reach around 100,000 units, and the market will have a huge space for development.

The China Knitting Computer Flatbed Application Technology R&D Center was established to develop the national industry, reduce the gap between domestic computerized flat knitting machines and international advanced equipment, enhance the ability of independent innovation, and increase the competitiveness of knitted computer flat knitting products across the country and even the world. On June 28, the China Knitting Computer Flatbed Application Technology R&D Center was formally established, and will establish an “experimental base” for the R&D center at Changshu Jinlong Machinery Co., Ltd. The R&D center integrates the strengths of domestic institutions of higher education, raw material supply, weaving equipment manufacturing, garment processing and manufacturing, and after-finishing technical services, and forms the basis of design, raw material supply, equipment technical services, processing and production, etc. The organic connection and cooperation in the downstream sectors will realize the effective integration of knitting machine flat knitting product resources, and will promote the development of the overall industrial chain in the computerized flat knitting industry. The cooperation and development of the industrial chain will be the inevitable trend of future development.

The situation of the computerized flat knitting market This year, the sales situation of computerized flat knitting machines is very good. High-tech products such as fully automatic computerized flat knitting machines are favored by customers due to their high cost performance. From the 2010 China International Textile Machinery Exhibition and the ITMA Asia Exhibition, it was learned that computerized flat knitting companies have obtained a lot of orders.

Behind the hot, there are naturally hidden problems. There are a number of companies that produce computerized flat knitting machines in China, but the number of truly R&D companies is very small. In the market, many companies buy the same parts, the same controller, buy it back and assemble it, and then sell it. There are also many phenomena in which computer flat knitting companies vilify each other and fight price wars.

At present, the disadvantages of hand-rolling flat knitting machines and the difficulty of recruiting work have created a trend: Computer flat knitting machines will gradually replace the position of hand-sweeping flat knitting machines in the domestic market. Of course, most small and medium-sized factories will take into account funding issues when purchasing equipment. Compared with the price of several hundred yuan for hand-rolled flat knitting machines, the price of computerized flat knitting machines is still unacceptable for some manufacturers. At the same time, the domestic computer flat knitting machine development time is relatively short, many technical difficulties can not be broken, weaving performance and after-sales service, slightly inferior to the import of computerized flat knitting machine, which is also a business consideration. In addition to the price, computerized knitting machine after-sales service is also a concern of the company's hot spots, with an excellent after-sales service team, no doubt to the knitting companies hit a pin powerful detent agent. It is learned from the knitting companies that economic computerized flat knitting machines are still the first choice for small and medium-sized enterprises.

Computer Flat Knitting New Products 2009 In the past, Tanger has launched a brand new knitted computer flat knitting machine LIBRA 3.130. GMF2.130 computer flat knitting machine, this machine is further developed on the basis of the Gemini2.130 model, and is the world's first computerized flat knitting machine that uses pneumatic triangulation to enable tight weaving. The GMF2.130 computerized flat knitting machine is easy to operate, produces efficiently, and has low energy consumption and maximum cost savings.

On February 5, 2010, Haina's first dual-system 5G computerized flatbed prototype officially went offline. This signifies that Jiaying Jing has completely mastered the production technology of the dual-system 5G computerized flat knitting machine, leaving an indelible mark on the Chinese computer weaving industry. In the process of pursuing excellence, Jiaying people continue to explore, gradually expand their own brand of the road, and take the initiative to assume the "Made in China" computer flat knitting machine social responsibility, which establish a new benchmark of China's knitting machine.

Judging from the current level of development, it is not a year or two that imported computerized flat knitting machines can be popularized in China. Compared to Shima Seiki of Japan and Stoll of Germany, the price of the 3G computerized flat knitting machine is less than 100,000. Therefore, from the price advantage point of view, Jiada 3G computerized flat knitting machine is still the first choice for the upgrading of sweaters and equipment. Jiada can be used with imported machines, and after-sales service is also trustworthy.

The face of the current market, the unpredictable environment, with efficient, energy-saving, and reduce the advantage of computerized flat knitting machine to maintain strong sales. In addition, the development of computerized flat knitting machines must meet the needs of technological transformation, structural adjustment, and industrial upgrading of enterprises. At present, the number of hand-held flat knitting machines in the country is about 1.6 million units, and that of computerized flat knitting machines is only about 100,000 units. The replacement of manual flat knitting machines by computerized flat knitting machines is an inevitable trend in the industry development and industrial upgrading. The demand for computerized flat knitting machines in the domestic market has only just begun. The industry generally believes that computerized flat knitting machines will maintain a steady growth trend for a long time to come.