The Star Type Unloader is used to install the discharge port of the discharging device under the negative pressure, the upper part accepts the material discharged from the discharging device, and the rotating impeller plays the role of conveying the material, and also acts as a seal to prevent the air from the discharge port during the pneumatic conveying process, ensuring the normal discharging of the discharger as a special kind of material. The unloading equipment plays a very important role in cleaning and cleaning. Therefore, it is necessary for us to summarize some of its characteristics so that we can better understand and maintain the star type unloader in an all-round way and give full play to its maximum ability.
The star type unloader can be used in the collection material system, as the discharging device of the silo, and the most advanced discharging device in the Star Type Discharger at present. It is often used as one of the important equipment of dust removal system in the dust removal system. It is especially suitable for dust. Small particle material is deeply affected by environmental protection, metallurgy, chemical industry, grain, cement, road building, drying equipment and so on. The engineering projects of the industry are preferred. Star type discharger Star Type Discharger,Star Type Unloader,Square Mouth Discharger,New Type Square Star Discharger Botou Youjian Environmental Protection Equipment Co. LTD. , http://www.btdustmachine.com
The characteristics of Star type discharger: 1, compact structure, beautiful appearance, easy to use. 2, the operation is smooth and the noise is low. 3, because of the distance between the bearing and the gear box leaving the shell, the lubrication has been greatly improved for high temperature. 4, it can be designed and manufactured according to the requirements of the user. 5, products should be lubricated with special grease for pin wheel cycloid reducer before they leave the factory. Please check the fuel regularly.
Is the mobile phone battery overcharged?
For the problem that the mobile phone battery should not be refilled after it is full, there are different opinions. Most netizens suggest that it is best to continue charging for 2-4 hours after the battery is full. But is this advice right?
Some people on the Internet said that they have used three batteries to conduct experiments using different charging methods. The results show that it is good to have more batteries after the battery is fully charged. In this regard, an engineer named Liu, a Samsung mobile phone repair center in Beijing, said that there is no basis for replenishing an hour. It is completely wrong for a mobile phone industry executive in Shenzhen to say that it should continue to charge for a few hours after the battery is full. There is a chip protection in the mobile phone, and it will not work when it is full. It also means that the lithium-ion battery is full of refilling, although it will not explode, but it will speed up the loss of battery capacity. Zhang Xiaodong, director of the Science and Technology Information Center of Jiangsu Sai Lian Information Industry Research Institute, said that any form of overcharge of lithium-ion batteries will cause serious damage to battery performance. In serious cases, even explosions, it is necessary to avoid overcharging the battery during charging. .
There is no unified statement about whether the mobile phone battery should be refilled after it is full. However, for safety reasons, it is best to just fill it up to avoid battery damage or explosion.