Inexperienced owners don't worry about the misunderstanding of decoration

Some inexperienced owners had regrets over the renovation and spent money. Changsha Yangze Decoration Design Engineering Co., Ltd. arranges some misunderstandings for you in the decoration, and assures you the quality of decoration and saves money.
Decoration misunderstanding 1, anyway, can not see, wire, plumbing to buy a lot of home buyers in the decoration time, because the hydropower reform is the first transformation so it is not particularly concerned about the feeling is buried in the wall, it does not matter. But did not think that if the purchased wire is not up to standard, there is a danger of short circuit or electric shock under power overload. Water pipe materials, if the quality of the purchase is poor, there is the possibility of bursting, so not only to rework, if serious, then there may be to remove the tiles, floors, and should buy high-quality wire, water pipes, in order to ensure safety.
Decoration misunderstanding 2, decoration casually look, you have I also have a lot of owners in preparation for the renovation, are generally reference design inside the model, and then directly copied over, even if designed to be the same, but also the lack of some of the things personality. If you plan to renovate later, it will be a bigger expenditure. This is not as good as it is to decorate as much as possible in accordance with their preferences and peace of life habits for decoration, to create a space of their own.
Decoration mistakes 3, figure save the strength of the electricity does not interval installation This is because there is a magnetic field around the strong electricity, if the weak electric power wiring distance is too close it will affect the weak signal, the specific performance is: If it is a cable TV line, the signal It will not be clear; if it is a telephone line, the phone will be noisy; if it is a network cable, the network transmission speed will be affected and so on. And the distance between strong and weak wires is more than 50cm. If you can't reach the frequency-shielded isolated electromagnetic waves, the joints on the TV and telephone lines are strictly prohibited, and they must be worn separately.
Strong electricity: Take the TV plug, etc. Weak power: Take HDMI, DVD TV, network cable, etc.
Weak electricity: generally refers to the telephone line, television line, network cable, audio surround line, is characterized by vulnerability to interference, especially cable, audio surround line.
Decoration misunderstanding 4, in order to be beautiful The power switch should be as little as possible. Some decorating friends think that in order to be beautiful, reducing the power switch is a very certain point. But did not take into account their actual needs, but also regret last, in accordance with the current trend of the development of the entire household appliances, the future of household appliances power is at most flat, if the switch is not enough, can only be connected to the socket, a socket with several devices, easy to cause Trip. The correct approach is, according to the housing area, in accordance with the design of professional electrician, and then integrate the actual number of household appliances, reasonable placement of the power plug, and leave some plugs in order to facilitate expansion. For more decoration, decoration, home information, please pay attention to Changsha Yangze Decoration Design Engineering Co., Ltd.


    XINYU MOULD is a professional Aluminum die casting mould maker located in the high-end mould industrial zone in BEILUN called "Aluminium HPDC Dies Hometown" where has been globally renowned for aluminium die casting dies design & fabrication. Our experience has taught us that clear communication, precision engineering and staying current with leading edge technology ensures our customers can depend on us to manufacture superior quality, cost-effective, high-efficiency dies. The dies for light metal parts for weight reduction (Structural Parts) as well as parts for Automotive Powertrain Oil Pan , Redirector , A/C Compressor are in our competence area, and also for the other applications ,such as telecommunication, lighting, power tool, furniture...whatever the need which requires alum. die casting dies, irrespective of sophistication or size, XINYU is able to offer unparalleled die/mould solution with competitive cost but without quality compromise, for more company information, please review the following details. we are looing forward to cooperating with you.  



 Aluminium Die-casting Dies / Mould / Tooling 

Die casting is a metal casting process that is characterized by forcing molten metal under high pressure into a mold cavity. The mold cavity is created using two hardened tool steel dies which have been machined into shape and work similarly to an injection mold during the process. Most die castings are made from non-ferrous metals, specifically zinc, copper, aluminium, magnesium, lead, pewter, and tin-based alloys. Depending on the type of metal being cast, a hot- or cold-chamber machine is used.Aluminium diecasting die

Fig. Aluminium Die-casting Mould Design


Two dies are used in die casting; one is called the "cover die half" and the other the "ejector die half". Where they meet is called the parting line. The cover die contains the sprue (for hot-chamber machines) or shot hole (for cold-chamber machines), which allows the molten metal to flow into the dies; this feature matches up with the injector nozzle on the hot-chamber machines or the shot chamber in the cold-chamber machines. The ejector die contains the ejector pins and usually the runner, which is the path from the sprue or shot hole to the mold cavity. The cover die is secured to the stationary, or front, platen of the casting machine, while the ejector die is attached to the movable platen. The mold cavity is cut into two cavity inserts, which are separate pieces that can be replaced relatively easily and bolt into the die halves.

The density of aluminum is only one third of that of iron and steel, but its thermal conductivity is more than three times higher than that of iron. Most notably, the structural design optimization of Al substitute Steel can achieve significant weight loss for Auto industry, and the effect can be directly reduced by 50 to 100 percent. Cars use 1 kg aluminum instead of 2.25 kg steel, which can reduce exhaust gas emissions by 20 kg. it can be seen that aluminum alloys have high strength, recyclability and corrosion resistance. Low density and other high quality properties have become the first choice material for automobile weight loss. XINYU MOULD have dedicated ourselves into aluminium die casting industry over past years by designing and building alum. HPDC dies for OEMs which have the demand of light metal parts for weight reduction (Structural Parts) as well as parts for Automobile, Lighting, Power tool, Mechanical etc  are in our competence area,irrespective of sophistication or size,XINYU is able to offer unparalleled die/mould solution with competitive cost but without quality compromise, warmly welcome paying the trip to XINYU MOULD

Aluminium diecast mould 

Fig. Aluminium Die-Casting Mould 


Xinyu Mould Capabilities

  • Xinyu Mould At Glance

1.Year Of Establishment:2002

2.Location:2 (One Is Brand New)

3.Land Area:3600sqm

4.Emplyees:120

5. Equipment;CNC:18 (Makino, Toshiba, Liyang ), WEDM:10, EDM:9, Spotting Machine:2, CMM:2, Gun Drill Machine:2, Die Casting Machine:7, Others:50


  • Xinyu Mould Technical Profile

1. Engineers In 2d&3d: 16

2. Engineers In Cnc Programming:6

3.File Format For 2d: Dwg&Dxf

4.File Format For 3d:Iges&Step

5.Software For 2d:CAD

6.Software For 3d:Simens NX & Pro-E 

7.Software For Programming: Powermill

8.Software For Mould Flow: Magma 


  • Xinyu Mould Process Control

1.MES Process Control System

2.IATF 16949 Quality System

3.Well-Trained Operators

4.CMM Inspection 


  • Xinyu Mould Advantages

1. CAE Support Magma(Lid 18175001)

2.Rich Experience In Casting Dies For Auto Structual Parts,Powertrain;Oil Pan;Redirector; AC Compressor

3.Trial Run Machines Available In House From 160t To 1600t

4.Vaccum Venting System Application In Dies

5. Partial Squeeze Skill In Dies

6.High Precision Imported CNC(5 Axis)

7.Globalized Hr Concept 

  • Xinyu Mould Die Capacity

1.Max Die Size:2500*2500*1800

2.Max Die Tonnage:2500t

3.Biggest Die Casting Machine:1600t

4.Most Complex Die: 11slides

5.Yearly Capacity:350sets 


  • Xinyu Mould Marketing

1.Main Market:Na;Europe;Asia

2.Main Field: Auto;Telecommunication;

Lighting;General Machinery;Power Tool

Furniture

3.Partner Offering After Sales Service:

Available In India&Us,Europe

4.Business Involved:

Aluminum Die Casting Dies

Aluminum Die Casting Components 


  • Xinyu Mould Commercial Terms&Conditions

1. Fob Ningbo/Shanghai

2.Payment Term:Tt

3.For Dies:50% Down Payment 50% Prior To Delivery

4. For Castings: 10% Down Payment

The Rest Within 30days After b/l Date

5.Leadtime For Quotation:2days

6.Feedback For Customers' Query:24hours



Aluminum Die Casting Die

Aluminum Die Casting Die, Aluminium Pressure Die Casting,Precision Aluminium Die Casting,Aluminium Die Casting Foundry

Ningbo Beilun XinYu Mould Manufacturing Co.Ltd. , http://www.xinyudiecasting.com